Home › Electrical Panel Upgrade
Panels and service upgrades · Round Rock, TX

Electrical Panel Upgrade in Round Rock, TX

Old panel, no breaker space, or not enough capacity for an EV charger, hot tub or new HVAC? Call now for a licensed Round Rock electrician for panel replacement and service upgrades.

Round Rock 78664, 78665, 78681 · Pflugerville · Hutto · Georgetown · Cedar Park · Leander

OUR WORK

Recent Electrical Panel Upgrade Projects in Round Rock, TX

Real panel upgrades and service changes completed by licensed local electricians for Round Rock homes.

Outdoor electrical panel upgrade with new breakers in Round Rock, TXNew electrical panel and meter on a brick wall in Round Rock, TXMeter main and breaker panel replacement in Round Rock, TXNew breaker panel installed on an exterior wall in Round Rock, TXUpgraded breaker panel with labeled circuits in Round Rock, TXGarage electrical panel upgrade finished in Round Rock, TXExterior main panel and subpanel installed in Round Rock, TXService upgrade with new meter and panel on a home in Round Rock, TX

When Your Panel Is Holding Your Home Back

Quick answer: An electrical panel upgrade in Round Rock means replacing an old, unsafe or full breaker panel, and often increasing the service to 200 amps. The work needs a City of Round Rock electrical permit, a torque letter signed by the master electrician, an inspection, and coordination with Oncor or your delivery utility to disconnect and reconnect the meter.

The breaker panel is the heart of your home electrical system. Every circuit starts there, and it is designed to carry a set amount of current safely. When a panel is worn out, a brand with a poor safety record, or simply full, it limits what you can add to the home and can become a fire risk.

In Round Rock, panel upgrade calls usually come from three groups. Owners of older homes near downtown and in the 1970s and 1980s neighborhoods, where 100 or 150 amp service and aging panels are still common. Owners of mid-2000s homes who want to add an EV charger, a pool, a hot tub or a workshop and find there is no space. And buyers whose home inspection flagged the panel during a sale.

A panel upgrade is not a quick swap. It involves a permit, a planned power shutdown, utility coordination and an inspection. A licensed electrician manages all of that and should explain each step before work starts.

Last updated: November 2026

Signs your panel needs attention

  • Federal Pacific Stab-Lok, Zinsco or other panels with known problems
  • Breakers that trip often or feel hot
  • No open slots, or many tandem breakers squeezed in
  • Rust, scorch marks or a burning smell at the panel
  • 100 or 150 amp service with plans for EV charging or new HVAC
  • A home inspection report that flagged the panel
📞 Call Now 123456

Reasons Round Rock Homeowners Upgrade Their Panels

Safety concerns

Some older panel brands are widely reported to have breakers that may not trip under overload. Electricians and home inspectors in Central Texas still find Federal Pacific Stab-Lok and Zinsco panels. Replacement removes that uncertainty.

Adding an EV charger

A Level 2 charger often needs a 40 to 60 amp circuit. On a 100 or 150 amp service already carrying central AC, an electric range and a dryer, that can exceed capacity. A load calculation tells you whether you need an upgrade or a load management device.

Heat pumps and HVAC

Replacing gas heat with a heat pump, or adding a second HVAC unit for a game room addition, adds large electrical loads that older services were not sized for.

Pools, hot tubs and shops

Pool pumps, spa heaters, welders and compressors need dedicated circuits, often 240V, and sometimes a subpanel in the garage or backyard.

Remodels and additions

Kitchen remodels typically add several required circuits. Additions need new circuits with AFCI and GFCI protection. A full panel cannot accept them.

Insurance and resale

Some insurers ask about panel brand and age, and buyers often negotiate over panels flagged by inspectors. Upgrading before listing can remove a sticking point.

How a Panel Upgrade Works in Round Rock

Every job is different, but most panel upgrades follow these steps.

Load calculation

Our electrician reviews your existing and planned loads to size the new panel and service. This prevents buying more, or less, capacity than you need.

Permit and scheduling

A City of Round Rock electrical permit is pulled. Our electrician schedules the utility disconnect with Oncor, or with Pedernales Electric Cooperative or Georgetown Utility Systems in areas they serve.

Installation day

Power is shut off, the old panel removed and the new panel installed, with circuits landed, labeled and grounding and bonding brought up to current code. Most residential swaps take most of a day.

Inspection and reconnect

The city inspects the work. The torque letter from the master electrician is uploaded to the permit. After approval, the utility reconnects and power is restored.

Breaker panel with new branch wiring in Round Rock, TX
Breaker panel with new branch wiring in Round Rock, TX

Panel Replacement, Service Upgrade or Subpanel?

Not every capacity problem needs a full service upgrade. These are the usual options.

OptionWhat it doesWhen it fits
Panel replacement, same amperageNew panel and breakers, same service sizeUnsafe or worn panel, capacity is adequate
Service upgrade to 200ANew panel plus larger service conductors and meter base as needed100 or 150 amp homes adding EV, HVAC or major appliances
SubpanelAdds circuit space in a garage, shop or additionMain panel has capacity but no space where you need it
Load management deviceShares capacity between large loads like an EV charger and dryerService is close to its limit and an upgrade is costly
Breaker replacement onlyReplaces failed breakers in a sound panelPanel is in good condition with isolated breaker problems

Permits, Torque Letters and Inspections

Panel replacements and service upgrades always need a permit in Round Rock. The City of Round Rock Building Inspection Division states that electrical upgrades and replacements require a torque letter, including the master electrician’s license number and signature, to be uploaded to the permit application. That letter confirms connections were tightened to the manufacturer’s specifications, which matters because loose lugs are a leading cause of panel failures.

The city uses the 2023 National Electrical Code. Expect the inspector to check grounding and bonding, breaker types and labels, working clearance in front of the panel and surge protection where required. See the city trade permit page.

What Drives Panel Upgrade Cost

Pricing comes from our electrician after a site visit. These factors move it most:

  • Service size: a same-size swap costs less than a 200A upgrade with new service conductors.
  • Panel location: moving a panel or meeting clearance rules adds work.
  • Meter base and mast: sometimes replaced with the upgrade.
  • Circuit count: more circuits to move and label means more labor.
  • Code items: grounding, bonding and surge protection updates.
  • Permit and inspection fees.

Ask for a written quote that lists the panel brand and size, what is included and who handles the utility scheduling. See the panel upgrade cost guide.

Why This Is Not a DIY Job

Texas law exempts owners working on a home they own and live in from state licensing, but panel work is among the most dangerous jobs in residential electrical. The service conductors feeding the panel stay energized until the utility pulls the meter, and a mistake there can cause severe injury. The work also needs a permit, a city inspection and, in Round Rock, a torque letter signed by a master electrician.

Before you hire, look up the license on the TDLR license search and confirm the permit is pulled in the contractor’s name.

Panels in Round Rock Homes

Panel age tracks the age of the neighborhood. Homes around Old Town and downtown can have the oldest equipment, sometimes with 100 amp service. Round Rock West, Chisholm Valley, Forest Creek and Lake Forest were largely built in the 1970s through the 1990s, which is the era when Federal Pacific and Zinsco panels may still be found. Homes in Brushy Creek, Behrens Ranch, Teravista, Paloma Lake, Siena and Mayfield Ranch generally have 200 amp service but can run short of space.

About 96% of Round Rock addresses are served by Oncor wires, so most upgrades include an Oncor meter disconnect and reconnect, scheduled by our electrician.

Understanding Amps, Load Calculations and Capacity

Service size is measured in amps. A 200 amp service at 240 volts can supply far more power than a 100 amp service, but that does not mean every home needs 200 amps, or that 200 amps is always enough. What matters is the calculated load: how much the home could reasonably draw at once based on its square footage, appliances and HVAC equipment.

How electricians calculate load

The National Electrical Code includes standard methods for calculating a dwelling’s load. Our electrician adds up general lighting and receptacle loads by square footage, required small appliance and laundry circuits, fixed appliances, the larger of heating or cooling, and any new loads such as an EV charger. Demand factors account for the fact that not everything runs at full power at the same time. The result shows whether your current service can support the new load.

Why Round Rock summers matter

Air conditioning is the largest continuous load in most Central Texas homes, and it runs for months. A panel that barely handles the AC, a dryer and an oven at the same time has little room for an EV charging overnight in August. Load calculations should reflect that reality.

Signs capacity is the real problem

  • Main breaker trips when several large appliances run.
  • Lights dim noticeably when the AC compressor starts.
  • The panel is full of tandem breakers.
  • Extension cords are used because circuits are overloaded.
  • You are planning an EV, heat pump, pool or addition.

Alternatives to a full upgrade

If the calculation shows you are close but not over, options include load management devices that pause an EV charger when other big loads run, smart circuit breakers, or a subpanel to add space. These can cost less than a full service upgrade and still meet code. A good electrician will explain the tradeoffs rather than defaulting to the biggest job.

When you call, mention any equipment you plan to add in the next few years. Sizing the panel once for future needs is usually cheaper than upgrading twice. If you are planning an EV, see EV charger installation in Round Rock; for backup power, see generator installation.

Related Electrical Services in Round Rock

EV Charger Installation

Often the reason a panel upgrade is needed.

Surge Protection

Commonly added at the new panel.

Generator Installation

Transfer switches tie into the panel.

Electrical Inspection

A full check before buying or upgrading.

Serving Round Rock and nearby Pflugerville, Hutto, Georgetown, Cedar Park, Leander and Brushy Creek. Related guide: Panel upgrade cost in Round Rock.

Panel Upgrade FAQs

How do I know if I need a panel upgrade?

Common signs are a panel brand with known problems, frequent tripping, no open breaker slots, heat or rust at the panel, or plans to add an EV charger, heat pump, pool or addition to a home with 100 or 150 amp service.

Does a panel upgrade need a permit in Round Rock?

Yes. Panel replacements and service upgrades need a City of Round Rock electrical permit and inspection. The city also requires a torque letter signed by the master electrician for electrical upgrades and replacements.

How long does a panel upgrade take?

Installation usually takes most of a day, during which power is off. Permit processing and utility scheduling add time before and after.

Is a Federal Pacific panel dangerous?

Federal Pacific Stab-Lok panels have long been reported to have breakers that may fail to trip under overload. Many electricians and inspectors recommend replacement.

Is a Zinsco panel safe?

Zinsco panels are associated with breakers that can overheat or fuse to the bus bar. Replacement is commonly recommended.

Do I need 200 amp service for an EV charger?

Not always. A load calculation decides. Some homes with 150 amp service can add a charger, sometimes with a load management device. Others need an upgrade.

Who contacts Oncor for the disconnect?

Our electrician normally schedules the meter disconnect and reconnect with Oncor, or with Pedernales Electric Cooperative or Georgetown Utility Systems where they serve.

Can I add a subpanel instead?

If the main service has enough capacity but you need more breaker space, a subpanel is often a good option for a garage, shop or addition.

Will a new panel include surge protection?

Many electricians recommend a whole-home surge protective device with a new panel, and current code requires surge protection for new or replaced dwelling services.

Ready to Upgrade Your Panel?

Call us today for licensed electrician service in Round Rock. Call us today to schedule electrical service.

📞 Call Now 123456
Scroll to Top