Home › House Rewiring
Partial and whole-home rewiring · Round Rock, TX

House Rewiring in Round Rock, TX

Aluminum wiring, ungrounded circuits, damaged cable or a remodel that needs new circuits? Call now for a licensed Round Rock electrician for partial or whole-home rewiring.

Round Rock 78664, 78665, 78681 · Pflugerville · Hutto · Georgetown · Cedar Park · Leander

OUR WORK

Recent House Rewiring Projects in Round Rock, TX

Real rewiring and panel wiring work completed by licensed local electricians.

New construction panel rough in wiring in Round Rock, TXBreaker panel with new branch wiring in Round Rock, TXPanel rewire with new breakers and circuits in Round Rock, TXPanel rewiring with new circuits in Round Rock, TX

When Repairing Wiring Is No Longer Enough

Quick answer: House rewiring in Round Rock replaces old, damaged or inadequate wiring with new copper circuits that meet the 2023 NEC adopted by the city. It can be partial, such as a kitchen or a few damaged runs, or whole-home. Rewiring needs a City of Round Rock electrical permit and inspections.

Most homes never need a full rewire. But some do, and others need sections of wiring replaced because of damage, age or a major remodel. Typical triggers in Round Rock include aluminum branch wiring in homes from the late 1960s and 1970s, ungrounded two-wire circuits in the oldest homes, rodent damage in attics, heat damage near old fixtures, and remodels that move kitchens, bathrooms or walls.

Rewiring is invasive work. Electricians fish new cable through walls and ceilings, which often means small openings in drywall that are patched afterward. A good electrician plans the route to minimize damage and keeps the home livable during the work.

The goal is wiring that is safe, grounded and sized for how you live now: more kitchen circuits, dedicated lines for appliances, AFCI and GFCI protection where required, and room for future loads.

Last updated: November 2026

Signs you may need rewiring

  • Aluminum branch circuit wiring
  • Two-prong ungrounded outlets throughout the home
  • Brittle, cracked or scorched insulation
  • Frequent trips that repairs have not solved
  • Rodent damage found in the attic
  • A major remodel or addition is planned
📞 Call Now 123456

Partial vs Whole-Home Rewiring

Partial rewiring

Replaces specific circuits: a kitchen, a bathroom, a damaged run or the circuits on one side of the house. It is faster and less disruptive and is the most common type in Round Rock.

Whole-home rewiring

Replaces all branch circuits, usually together with a panel upgrade. Best when wiring is failing throughout or the home is being renovated.

Aluminum remediation

Instead of full replacement, approved connectors can join copper pigtails to aluminum conductors at every device and splice. A full rewire is the other option.

Remodel wiring

Kitchens and bathrooms need multiple dedicated and GFCI-protected circuits under current code. Open walls during a remodel are the best time to rewire.

Grounding upgrades

Two-wire circuits can be replaced with grounded cable, or protected with GFCI devices as code allows where replacement is not practical.

Damage repairs

Rodents, nails and heat can damage sections of cable. Those runs are replaced and protected.

How a Rewiring Project Works

Rewiring is planned around permits and inspections.

Assessment

Our electrician inspects the panel, tests circuits and maps what needs replacing. You get a scope and price.

Permit

A City of Round Rock electrical permit is pulled. Larger jobs have a rough-in inspection before walls are closed.

Rough-in

New cable is routed through attics, walls and crawl spaces with care to limit drywall openings.

Finish and final

Devices and fixtures are installed, circuits labeled and tested, and the final inspection is completed. Drywall patching follows.

Electrical panel wiring repair in progress in Round Rock, TX
Electrical panel wiring repair in progress in Round Rock, TX

Old Wiring Types and What They Mean

Wiring typeCommon eraConcernTypical approach
Two-wire cable without groundOlder homesNo equipment ground; limited protectionReplace circuits or add GFCI protection as code allows
Aluminum branch wiringMid-1960s to mid-1970sConnections can loosen and overheatApproved pigtail repair or replacement
Early grounded copper cable1970s onwardUsually sound; check connectionsRepair damaged sections, add circuits
Modern copper cable with AFCI/GFCIRecent homesGenerally currentAdd circuits for new loads

Permits and Inspections

Rewiring requires a permit from the City of Round Rock Building Inspection Division inside city limits. The city uses the 2023 National Electrical Code and includes two inspections of each type in the permit fee, with re-inspection fees after repeated failures. Rewiring projects typically need a rough-in inspection before walls close and a final inspection after devices are installed.

The U.S. Consumer Product Safety Commission has published guidance on repairing aluminum wiring.

What Affects Rewiring Cost

  • Scope: a few circuits versus the whole home.
  • Home size and layout: one or two stories, attic access.
  • Wall finishes: plaster, tile and finished ceilings add time.
  • Panel work: often combined with an upgrade.
  • Drywall patching: who handles it.
  • Permits and inspections.

Ask for a written scope listing which circuits are replaced and what is excluded.

Living Through a Rewire

Most partial rewires are done while the home is occupied. Power is off only to the circuits being worked on. For whole-home rewiring, expect several days of work with periods of no power in parts of the house. Clear access to walls, closets and the attic speeds things up, and protecting furniture from dust helps.

This is not a DIY project. It involves the panel, multiple inspections and code rules that change between editions.

Rewiring in Round Rock

Homes near Old Town and downtown Round Rock are the most likely to have outdated wiring. Some homes from the late 1960s and early 1970s may have aluminum branch wiring. Neighborhoods built in the 1980s and 1990s, such as Round Rock West, Forest Creek and Chisholm Valley, more often need partial rewiring during kitchen and bath remodels or after attic damage. Newer communities rarely need rewiring except for remodels or damage.

Questions to Ask Before You Rewire

  • Which circuits are being replaced, and why?
  • Will the panel need to be upgraded at the same time?
  • How many drywall openings should I expect, and who patches them?
  • Which inspections are required, and when?
  • Will new AFCI and GFCI protection be added where code requires?
  • Are smoke and carbon monoxide alarms included?

A clear answer to each of these questions is a good sign that our electrician has planned the job. Rewiring is also a chance to add what you will need later: more kitchen counter circuits, a dedicated circuit for a home office, outdoor outlets, an EV-ready circuit in the garage, or low-voltage data cabling while walls are open. Planning these now costs less than opening walls again.

Keep the permit and inspection records with your home documents. Buyers, appraisers and insurers often ask about wiring age and updates.

Related Electrical Services in Round Rock

Panel Upgrade

Often paired with whole-home rewiring.

Electrical Inspection

Find out what needs replacing.

Outlets and Switches

Grounded and GFCI outlets.

Electrical Repair

Fix individual damaged circuits.

Serving Round Rock and nearby Pflugerville, Hutto, Georgetown, Cedar Park, Leander and Brushy Creek.

House Rewiring FAQs

How do I know if my house needs rewiring?

Signs include aluminum branch wiring, ungrounded two-prong outlets throughout, brittle or scorched insulation, recurring faults, and damage found in the attic. An electrical inspection confirms it.

Does rewiring need a permit in Round Rock?

Yes. Rewiring needs a City of Round Rock electrical permit and inspections inside city limits.

Can I stay in my home during rewiring?

Usually yes for partial rewiring. Whole-home projects may involve periods without power in parts of the house.

Is aluminum wiring dangerous?

Aluminum branch wiring can develop loose, overheating connections. Approved repair methods or replacement reduce the risk.

Will rewiring damage my walls?

Some small openings are usually needed. Electricians route through attics and existing paths to keep them to a minimum.

How long does rewiring take?

Partial jobs can take a day or two. Whole-home rewiring can take several days plus inspection scheduling.

Should I upgrade my panel when rewiring?

Often yes, especially in older homes with small or outdated panels.

Can two-prong outlets be replaced without rewiring?

Code allows GFCI protection as a replacement option in some cases, labeled accordingly. Grounded wiring is the more complete fix.

Does rewiring increase home value?

Updated wiring can remove objections from buyers and inspectors and may affect insurance.

Who performs the rewiring?

Our licensed electricians serve Round Rock and nearby Williamson County. Every job is done by a Texas licensed electrician.

Need Wiring Updated?

Call us today for licensed electrician service in Round Rock. Call us today to schedule electrical service.

📞 Call Now 123456
Scroll to Top