Lighting Installation in Round Rock, TX
Recessed lights, under-cabinet LEDs, new fixtures, outdoor security lighting or landscape lights? Call now for a licensed Round Rock electrician who plans and installs lighting to code.
Round Rock 78664, 78665, 78681 · Pflugerville · Hutto · Georgetown · Cedar Park · Leander
Recent Lighting Installation Projects in Round Rock, TX
Real chandelier, pendant, sconce and landscape lighting installs by licensed local electricians.








Better Light for Every Room and the Yard
Lighting changes how a home feels and how safe it is at night. Many Round Rock homes were built with a single ceiling fixture per bedroom, a few cans in the kitchen and a porch light. Owners often want brighter kitchens for cooking, layered living room lighting, better light in bathrooms and closets, and outdoor lighting that makes driveways and backyards usable after dark.
LED technology makes this easier than ever. Slim wafer lights fit in places where old cans would not, under-cabinet strips run cool, and smart dimmers let you set scenes from a phone. The work still involves line-voltage wiring, boxes, switches and attic runs, which is where a licensed electrician comes in.
When you call, describe the room, the ceiling type, whether there is attic access above it and the look you want. Photos help our electrician plan.
Last updated: November 2026
Good reasons to upgrade lighting
- Dark kitchen work areas or shadows on countertops
- Old fixtures that flicker, buzz or run hot
- No switch-controlled light when you enter a room
- Outdoor areas too dark for safe walking at night
- Halogen or incandescent fixtures you want to convert to LED
- A remodel that changes the room layout
Popular Lighting Projects in Round Rock
Recessed lighting
Slim LED wafer lights install from below with minimal drywall work and are rated for contact with insulation. Spacing and beam angle are planned so light is even across the room.
Kitchen lighting
Under-cabinet LEDs light countertops directly. Pendants over an island add task light. Separate switching for each layer gives flexibility.
Fixture replacement
Swapping an old fixture for a new one is simple, but heavy chandeliers need a box rated for the weight and secure mounting.
Dimmers and smart switches
LED-compatible dimmers prevent flicker and buzzing. Smart switches often need a neutral wire in the box, which older homes may not have.
Outdoor security lighting
Motion-activated floodlights on garages and backyards improve safety. Fixtures and boxes must be rated for wet locations.
Landscape lighting
Low-voltage path and accent lights run from a transformer plugged into a GFCI-protected outdoor outlet, often on a timer or photocell.
How a Lighting Project Works
Small swaps take an hour. Larger projects follow a plan.
Plan the layout
Our electrician checks attic access, ceiling joists, existing circuits and switch locations, and suggests fixture spacing.
Confirm circuits and permits
Adding new lighting circuits or extending wiring generally needs a City of Round Rock permit. Simple like-for-like fixture swaps usually do not.
Install
Fixtures, boxes, switches and wiring are installed with minimal drywall disruption. Exterior work uses weather-rated parts.
Test and adjust
Dimmers are matched to the LED load, smart switches are set up and every fixture is tested.

Choosing Fixtures and Color Temperature
Color temperature, measured in kelvin, sets the feel of the light. Many LED fixtures let you choose it with a switch.
| Room | Common color temperature | Notes |
|---|---|---|
| Living and bedrooms | 2700K to 3000K | Warm, relaxed light; add dimmers |
| Kitchen | 3000K to 3500K | Clean task light; under-cabinet LEDs help |
| Bathrooms | 3000K to 3500K | Use wet or damp rated fixtures near showers |
| Garage and workshop | 4000K to 5000K | Bright, neutral light for tasks |
| Outdoor security | 3000K to 4000K | Shielded fixtures reduce glare to neighbors |
Codes, Permits and Safety
Round Rock uses the 2023 National Electrical Code. Code rules cover fixture ratings in damp and wet locations, clearances in closets, insulation contact ratings for recessed lights, and boxes rated for fixture weight. New circuits and extended wiring generally require a City of Round Rock electrical permit; replacing a fixture in the same location generally does not.
For energy savings and product ratings, the U.S. Department of Energy explains how LEDs compare with older bulbs.
What Affects Lighting Installation Cost
- Number of fixtures and whether they are new locations.
- Attic access: open attics are faster than finished ceilings.
- Ceiling height: high ceilings need more time and equipment.
- Switching: new switch locations, three-way and smart controls.
- Fixtures: supplied by you or our electrician.
- Permits for new circuits.
Our electrician gives the price. Combining several lighting tasks in one visit is usually more efficient than separate calls.
Do-It-Yourself Limits
Changing a bulb or plugging in a lamp is fine. Wiring fixtures, adding boxes and running cable is electrical work, and mistakes can cause shocks, heat damage and fire. Texas lets an owner work on the home they live in, but code and permits still apply, and Round Rock summers make attic work genuinely dangerous due to heat.
Always turn off power at the breaker before touching a fixture, and use a tester to confirm it is off. For anything beyond a bulb change, call a licensed electrician.
Lighting in Round Rock Homes
Older homes in Round Rock West, Chisholm Valley and Forest Creek often have few overhead lights and switch boxes without neutral wires, which affects smart switch options. Newer homes in Teravista, Paloma Lake, Siena and Mayfield Ranch usually have more cans but builder-grade fixtures that owners want to upgrade. Outdoor lighting is popular across the city for patios, pergolas and pools, especially in the cooler evening hours of a Texas summer.
If you live in an HOA neighborhood, check whether exterior fixtures or lighting levels are restricted before buying.
Planning a Recessed Lighting Layout
Recessed lights look best and work best when they are planned rather than placed by eye. A common starting point is to divide the ceiling height by two to estimate spacing between fixtures, then adjust for the room. Lights should be placed to light work surfaces and walls, not just the center of the floor.
- In kitchens, place cans so light falls on the front edge of counters, not behind your head.
- Use wall-washing placement near art, bookcases and fireplaces.
- Keep fixtures clear of ceiling fans to avoid strobing shadows.
- Choose IC-rated fixtures where insulation is present.
Dimmers and LED compatibility
Not every dimmer works with every LED. Mismatches cause flicker, buzzing or lights that do not dim smoothly. Electricians select dimmers listed for the fixtures and check the minimum load. Smart dimmers add scheduling and voice control.
Outdoor lighting that neighbors appreciate
Use shielded fixtures that point down, choose warmer color temperatures and put security lights on motion sensors. This reduces glare into neighboring yards and is often required by HOA rules. Dark-sky friendly fixtures also save energy.
Related Electrical Services in Round Rock
Ceiling Fan Installation
Add a fan with a light kit to any room.
Outlets and Switches
Dimmers, smart switches and GFCI outlets.
Electrical Repair
Fix flickering and buzzing fixtures.
Commercial Lighting
LED retrofits for businesses.
Serving Round Rock and nearby Pflugerville, Hutto, Georgetown, Cedar Park, Leander and Brushy Creek.
Lighting Installation FAQs
Do I need a permit to install recessed lights in Round Rock?
Adding new recessed lights with new wiring generally requires an electrical permit in Round Rock. Replacing an existing fixture in the same location generally does not.
Can recessed lights be added without tearing up the ceiling?
Usually. Slim LED wafer lights install through small openings, and electricians can fish wire through attics with minimal drywall work.
Why do my LED lights flicker on a dimmer?
The dimmer may not be compatible with the LED fixture or the load may be below the dimmer minimum. A compatible dimmer usually fixes it.
What color temperature should I choose?
Warm 2700K to 3000K suits living areas and bedrooms. 3000K to 3500K works for kitchens and baths. Garages and workshops often use 4000K or higher.
Can I add smart switches in an older home?
Many smart switches need a neutral wire in the box, which some older homes lack. Some models work without a neutral; an electrician can advise.
How many recessed lights do I need?
It depends on room size, ceiling height and the fixture beam. A quick rule is spacing roughly half the ceiling height apart, adjusted by our electrician.
Is landscape lighting low voltage?
Most landscape lighting is low voltage, powered by a transformer plugged into a GFCI-protected outdoor outlet.
Can heavy chandeliers be hung on a standard box?
Heavy fixtures need a box and support rated for the weight. Our electrician will check before installing.
Are LED fixtures worth it?
LEDs use far less energy and last much longer than incandescent or halogen bulbs, according to the U.S. Department of Energy.
Who installs the lighting?
Our licensed electricians serve Round Rock and nearby Williamson County. Every job is done by a Texas licensed electrician.
Ready to Upgrade Your Lighting?
Call us today for licensed electrician service in Round Rock. Call us today to schedule electrical service.
📞 Call Now 123456